Leaders in professional radon instrumentation and analysis solutions    

 
 

RAD AQUA

Continuous Radon in Water Accessory for RAD7

 
 

The RAD AQUA is an accessory for the DURRIDGE RAD7 radon detector that is used to bring the radon concentration in a closed air loop into equilibrium with the radon concentration in a flow-through water supply. It consists of a spray chamber, called an "exchanger", that brings the air and water into equilibrium. The radon in the air is monitored continuously by the RAD7.

The partition coefficient (the ratio of radon concentration in the water to that in the air at equilibrium) is determined by the temperature at the air/water interface. This temperature is measured with a temperature probe inserted into the exchanger. At typical room temperature the coefficient is about 0.25. That means the concentration of radon in the air is four times higher than in the water. As a result, the system's sensitivity to radon in water is four times higher than the sensitivity to radon in air.

It takes time for the water to deliver radon to the air loop and for the RAD7 to respond to the changed radon concentration. With optimum configuration the response time of the system may be reduced to less than half an hour.

Product Highlights

  • Radon and Thoron Measurement: Continuous monitoring in water.
  • Simple to Use: Just connect it to the tap and hook it up to the RAD7.
  • Fast: 95% response in 30 minutes.
  • Sensitive: Can monitor radon even in concentrations below 1 pCi/L.
  • Accurate: Measurements are precise within +/- 5%.
  • Clean and Safe: Involves no hazardous materials or chemicals.
  • Complete: Includes temperature logger and necessary software.
  • Great Value: Practically no running costs.

How it Works

Water passes continuously through the RAD AQUA exchanger. Air flows in a closed loop through the exchanger and through the RAD7. Radon in the air comes into equilibrium with radon in the water. From the radon concentration in the air and the temperature of the air/water interface, the radon concentration in the water is determined. This is the fastest, most sensitive method of measuring radon in water, and it can monitor both radon and thoron levels continuously.

RAD AQUA Physical Specifications

RAD AQUA Shipping Dimensions

16" x 8" x 8" (41 cm x 20 cm x 20 cm)

RAD AQUA Shipping Weight

7 pounds (3.2 kg)

 


Documentation

RAD AQUA Manual (PDF)

RAD AQUA Flyer: See Who's Using the RAD7 and RAD AQUA (PDF)

Media

RAD AQUA Standard Configuration Diagram

RAD AQUA Configuration Diagram (with DRYSTIK and Water Switch)

Featured Articles

Product Comparison: Radon In Water Accessories (HTML)

Related Accessories

DRYSTIK Model (HTML)

Indoor Faucet Connector (HTML)

Purchasing

Price List (HTML)

    RAD AQUA Assembly

Products Accessories Services Software Support More
RAD7 Radon Detector
RAD H2O
Big Bottle System
RAD AQUA
Water Probe
DRYSTIK
Soil Gas Probes
Range Extender
Emission Chambers
CO2 Logger
Cool Trap
Duty Cycle Controller
Indoor Faucet Connector
Natural Rock Sample
Relay Box
Serial Bluetooth Adaptor
USB to Serial Adaptor
Water Switch
RAD7 Calibration
Thoron Calibration
RAD7 Repair
Firmware Upgrades
CAPTURE®
DURRIDGE Terminal
DURRIDGE Translator
Software Drivers
Product Manuals
Support Contacts
Video Tutorials
Research Papers
External Radon Links
DURRIDGE News
Purchasing
Company Information
Customer Testimonials
Contact Us